80TPH Tantalum Beneficiation Plant In Rwanda

Tantalum-niobium ores are mostly placer ores with simple properties and single composition. Generally, the content of mud is high and the clay is strong.

80TPH Tantalum Processing Plant flow details:

1. Feeding & Washing: vibrating feeder, trommel scrubber
The material smaller than 60mm enters the trommel scrubber through the vibrating feeder to clean the silt and other impurities of the raw ore. Sieve the material into 0-10mm, 10-60mm material.

2. Crushing & Screening: cone crusher, vibrating screen
Among them, the 0-10mm material directly enters the vibrating screen. 10-60mm material is transported to the cone crusher by belt conveyor for crushing to less than 10mm, and then transported to the same vibrating screen by belt conveyor for screening. Screened into 0-1mm, 1-10mm, more than 10mm these three kinds of material specifications.

3. Classifying & Separation: hydrocyclone, jig seaprator
The o-1mm material is directly transported to the cyclone by a sand pump for grading and dehydration, and the overflowing muddy water enters the pool. Materials more than 10mm are returned to the cone crusher for secondary crushing, and the next step is carried out after reaching the qualified particle size. The 1-10mm material enters the jig machine for separation to obtain tantalum concentrate, the tailings of the jig machine enter the vibrating screen for screening, and the material larger than 0.5mm is transported to the side by a belt conveyor.

4. Gravity separation: spiral chutes, shaking tables
The underflow of the cyclone enters the spiral chute for gravity separation, while the concentrate and medium ore enter the two-stage shaking table for separation to improve the grade of the concentrate.

5. Tailings treatment
The tailings and materials less than 0.5mm in the spiral chutes and shaker are transported to the cyclone by a sand pump for desliming and mediation, the underflow is screened, and the overflow muddy water enters the pool.

JXSC has had great success with tantalum-niobium mines in Nigeria, Rwanda and Uganda. We provide them with a full set of tantalum-niobium ore beneficiation processes, equipment, and installation services. We are familiar with the tantalum-niobium ore benefication in Africa and have rich practical experience. If you have any questions about tantalum-niobium ore dressing, please contact us at any time, experienced technical personnel will answer all questions for you.